F3-20L automatic lifting three-layer glass reactor

Autonomous products and other conventional products


Classification:

Automatic lifting glass reactor


Key words: experimental instrument


online message

Product Details

Scientific instruments are tools for precision measurement, and their precision and reliability must be an order of magnitude higher than the object being measured. Therefore, although there are not as many components as airplanes, the systematic design is also beyond imagination. The chromatographic column, as a consumable, is a separation center, just like the heart. High pressure, tightness and flow rate stability are required. And the oven needs to be kept at a constant temperature. To prevent leakage, maintain constant temperature, pressurized flow, every link, can not be slack. For materials, seals, and fluid mechanics, a high foundation is required.

The method for checking whether the instrument leaks: pinch off the external vacuum skin tube, and observe whether the vacuum gauge on the instrument can keep the instrument leak-free for five minutes. If there is air leakage, check whether the sealing ring on each sealing joint and rotating shaft is effective. On the contrary, the instrument is normal to check the vacuum pump and vacuum pipeline.

F3-20L automatic lifting three-layer glass reactor

Model: F3-20L

Features: The F3-20L automatic lifting three-layer glass reactor has an electric constant speed stirring system, condensation and dropping system, and the interlayer in the kettle body needs to be externally connected with heating or cooling circulation equipment. The interlayer outside the kettle needs to be externally connected with vacuum equipment to maintain vacuum to keep the temperature of the materials in the kettle warm.


Working principle

This machine has an electric constant speed stirring system, condensation and dropping system. The interlayer in the kettle needs external heating or cooling circulation equipment. The interlayer outside the kettle needs external vacuum equipment to maintain vacuum to keep the temperature of the materials in the kettle.

While stirring the materials, the circulating hot solution or cooling liquid is injected through the inner interlayer to heat or cool the materials in the kettle at a constant temperature. When the material is heated, the evaporation efficiency can be improved under vacuum conditions (vacuum device needs to be connected). The solvent vapor is cooled into liquid when passing through the glass condensing coil (cooling device needs to be connected), which can be returned to the kettle or recovered through the valve at the lower part of the reflux elbow. After the reaction is completed, the materials can be discharged from the side discharge port at the bottom of the kettle.

The lifting and rotating reaction kettle is based on the common reaction kettle, which can make the kettle cover and the part above the kettle cover rise as a whole. After the stirring rod leaves the kettle body, the kettle body can rotate 150 degrees to the left through the hand wheel to directly pour out the materials, which is convenient for cleaning the kettle body.

This series of products use the need to support the vacuum device, high temperature or low temperature circulation device and other components of the system device.

Basic configuration

• The glass is high borosilicate glass (expansion coefficient 3.3), which can be used in the range of high temperature (250 ℃) to low temperature (-80 ℃).

The kettle body is made of three layers of glass, forming an inner interlayer and an outer interlayer. The inner interlayer is filled with cold and hot circulating liquid, and the outer interlayer is vacuumed to keep the temperature of the materials in the kettle.

• The main bracket is made of square steel anti-corrosion plastic-sprayed aluminum alloy stainless steel.

• The kettle cover is made of PTFE.

The kettle cover and the part above the kettle cover can be raised and lowered electrically, and the kettle body can be rotated 150 degrees to the left by hand wheel.

• Glass PTFE discharge valve, no liquid side discharge.

After the jacket inlet and outlet ports are connected with stainless steel hoses, they are fixed to the bracket and then connected with the external circulating pipe to reduce the inlet and outlet hydraulic pressure and avoid damage to the connecting part of the glass interlayer circulating port and the circulating pipe.

Low-speed booster motor, frequency conversion speed regulation, through the rotary fine adjustment, double display speed control box can digitally display the speed and the temperature of the material in the kettle.

The mixing system adopts ceramic bearing and mechanical seal to prevent the mixing rod from wearing off chips.

• Using PT100 temperature sensor, 304 stainless steel, transparent Teflon tube jacket, double anti-corrosion.

• Vacuum pressure gauge shows real-time vacuum, pointer display.

• Crescent-type stirring paddle, 304 stainless steel PTFE stirring blade; Stirring rod is made of 304 stainless steel, outer PTFE tube.

• The bottom of the machine is equipped with a brake Fuma universal wheel, which can move as a whole and is easy to operate.

• Stirring, lifting fuse safety protection.

Technical parameters

Model

F3-20L

Capacity of kettle body

20L inner diameter 290mm middle 330mm outer diameter 365mm inner length 386mm

Inner interlayer capacity

About 7L

Voltage frequency

220V/50HZ

Overall power

130W

Stirring motor power

90W1/3

Lifting motor power

40W1/12.5

Stirring speed

0-450rpm/min

Kettle body temperature range

-80 ℃ ~ 250 ℃

Temperature measurement accuracy

± 1 ℃

vacuum degree

0.098Mpa

 

kettle cover

Φ265mm

Six-port (full PTFE cap)

Mixing port

Φ50mm thread mouth

Condensate return port

50# ball milling port

Constant pressure funnel mouth

40# mark

Decompression port

34# mark

Temperature measuring port

24# mark

Solid feeding port

Φ80mm thread mouth, inner diameter 50#mm

Stirring paddle

Φ17 × 750H(mm) Leaf exhibition 190mm

Condenser size

Φ60 flange port under Φ100*600H(mm)

Condensation area

0.4 ㎡

Reflow elbow

Upper Φ60 flange port left 50# ball grinding plug lower 1L ball bottle with glass discharge valve

constant pressure funnel

1L upper 29# standard mouth with glass plug lower 40# standard plug

Connection of S-shaped adapter with lower 40# standard port × 40# standard plug and kettle cover

Pressure reducing valve

34# standard plug valve bleed nozzle (pagoda connector) outer diameter 12mm

Inner interlayer inlet and outlet circulation port

Φ45mm flange port is equipped with 6-point buffer device and 4-point wire port of external interface

Outer sandwich vacuum port

Φ35 Flange mouth matching glass PTFE extraction valve

Suction nozzle (pagoda connector) outer diameter 12mm

discharge port

Φ75mm flange Φ33mm discharge hole inclined discharge port (pagoda joint) Φ34mm 280mm from the ground

vacuum suction nozzle

External diameter of pagoda connector 12mm

Condensing coil inlet and outlet circulation nozzle

Outer diameter of pagoda joint 15mm

Host lifting stroke

560mm (actually, the stirring rod is 50mm away from the upper opening of the kettle cover)

Space size of the whole machine

750 × 850 ×(2150-2700 after rising) mm width, depth and height

Packing size

2180 × 680 × 1090mm wooden case 1.62m ³

machine net weight

140KG

Packing weight

213KG

F3-20L automatic lifting three-layer glass reactor

Recommended Products

immediate consultation

Submit Message