All-steel test bench

Autonomous products and other conventional products


Classification:

Test bench


Key words: experimental instrument


online message

Product Details

Scientific instruments are tools for precision measurement, and their precision and reliability must be an order of magnitude higher than the object being measured. Therefore, although there are not as many components as airplanes, the systematic design is also beyond imagination. The chromatographic column, as a consumable, is a separation center, just like the heart. High pressure, tightness and flow rate stability are required. And the oven needs to be kept at a constant temperature. To prevent leakage, maintain constant temperature, pressurized flow, every link, can not be slack. For materials, seals, and fluid mechanics, a high foundation is required.

The method for checking whether the instrument leaks: pinch off the external vacuum skin tube, and observe whether the vacuum gauge on the instrument can keep the instrument leak-free for five minutes. If there is air leakage, check whether the sealing ring on each sealing joint and rotating shaft is effective. On the contrary, the instrument is normal to check the vacuum pump and vacuum pipeline.

1) Size: length 1000mm * width 750mm * height 800mm
2) Table top: 12.7mm thick solid core physical and chemical board is adopted, the front edge is rounded, and a water guide groove is set at the lower part of the front edge of the table top to prevent liquid from overflowing along the curved surface of the front edge. Overall beautiful and generous, high temperature resistance, acid and alkali resistance, corrosion resistance, non-absorbent, fireproof, flame retardant, anti-static, anti-aging, non-toxic, non-fading, hard material, firm and reliable.
3) Cabinet body: 1.0mm thick high-quality cold-rolled steel plate is used. After pickling, phosphating and derusting on the surface, epoxy resin powder is sprayed by high-voltage electrostatic spraying, which does not fall off and is corrosion resistant.
4) Drawer, cabinet door, laminate and back plate: 1.0mm thick high-quality cold-rolled steel plate is used. After pickling, phosphating and derusting on the surface, epoxy resin powder is sprayed by high-voltage electrostatic spraying, which does not fall off and is corrosion resistant.
5) handle: stainless steel pull handle.
6) Foot: ABS engineering plastic adjustable foot, screw diameter 12mm, adjustable height 0-30mm, with the function of reducing impact.
7) Hinge: high quality hinge, opening angle of 110 ° hinge opening within 15 ° with self-closing function, corrosion resistance, load-bearing, durable, open and close more than one hundred thousand times.
8) Guide rail: imported high-quality brand, ultra-quiet three-section ball slide rail, bearing ≥ 15kg, opening and closing more than 100,000 times without deformation.
9) Socket: 220V10A6 hole socket, equipped with tower power box, with waterproof cover.

All-steel test bench

Recommended Products

immediate consultation

Submit Message