Hydrothermal reaction kettle

Autonomous products and other conventional products


5-500ml complete set containing PTFE lining

Key words: experimental instrument

online message

Product Details

Scientific instruments are tools for precision measurement, and their precision and reliability must be an order of magnitude higher than the object being measured. Therefore, although there are not as many components as airplanes, the systematic design is also beyond imagination. The chromatographic column, as a consumable, is a separation center, just like the heart. High pressure, tightness and flow rate stability are required. And the oven needs to be kept at a constant temperature. To prevent leakage, maintain constant temperature, pressurized flow, every link, can not be slack. For materials, seals, and fluid mechanics, a high foundation is required.

The method for checking whether the instrument leaks: pinch off the external vacuum skin tube, and observe whether the vacuum gauge on the instrument can keep the instrument leak-free for five minutes. If there is air leakage, check whether the sealing ring on each sealing joint and rotating shaft is effective. On the contrary, the instrument is normal to check the vacuum pump and vacuum pipeline.

Product Introduction:

Hydrothermal synthesis reactor has been widely used in the research and production of petrochemical, biomedical, material science, geological chemistry, environmental science, food science, commodity inspection and other departments. The hydrothermal synthesis reactor has a temperature resistance of 230 degrees and a pressure resistance of 3Mpa. It can be heated at constant temperature for a long time for three days within 220 degrees to ensure that the seal does not leak and the lining does not deform.

Product features:

1. Good corrosion resistance, no spillage of harmful substances, reduced pollution, and safe use.

2. After heating and boosting, it can quickly dissolve samples that are difficult to dissolve under conventional conditions and samples containing volatile elements without loss.

3. Beautiful appearance, reasonable structure, simple operation, shortened analysis time and reliable data.

4. There is a PTFE bushing, double-layer care, acid and alkali resistance, etc.

5. It can replace platinum crucible to solve the problem of sample dissolution in the analysis of trace elements in high purity alumina.

The following models are available: 5ml,10ml,15ml,20ml,25ml,30ml,50ml,75ml,100ml,150ml,200ml,250ml,300ml,400ml,500ml,1000ml,2000ml specifications can be selected according to the experimental amount.

Technical parameters:

1. Working temperature: ≤ 230 ℃

2. Working pressure: ≤ 3MPa

3. Heating and cooling rate: ≤ 5 ℃/min


Hydrothermal reaction kettle

Recommended Products

immediate consultation

Submit Message